Filter
Top Products
8
Performing an Internet Fax/IP Address FAX Operation
8-36 Scanner Mode
5 If [One-Touch] is touched, appears.
For details, refer to “Selecting a Recipient From the List on the One-
Touch Screen” on page 4-5.
❍ To check the information, touch [10-key Dialing], and then move
the cursor over . Touch [DetailDest.] to display the address
registered in the one-touch key. Move the cursor using [←] and
[→].
❍ To change the address, touch [10-key Dialing], and then either
move the cursor using [←] and [→] or press the [C] (clear) key and
type in the new information. To delete the one-touch key selected
by the cursor, touch [Delete].
Touch [Alpha] to return to the previous screen.
❍ To enter another address, touch the next one-touch key that you
wish to specify.
6 Press the [Start] key.
The transmission begins.
By typing in the address
1 Position the document(s) to be faxed.
2 Press the [Fax/Scan] key.
❍ For a copier, press the [Scan] key.
3 Touch [Chain Dial].
4 In the 10-Key Dialing screen, touch [Com. Mode], and then touch
[InternetFAX], then [E-mail].
5 Type in the e-mail address.
Refer to “Basic Transmission” on page 8-1.
❍ To change the address, either move the cursor using [←] and [→]
or press the [C] (clear) key, and then type in the new information.
To delete the one-touch key selected by the cursor, touch [Delete].
✎
Tip
If a frequently used domain name is registered in a domain name
button, the e-mail address can be entered more easily. Refer to
“Programming a domain name button” on page 3-27.
6 Press the [Start] key.
The transmission begins.