Filter
Top Products
Performing an Internet Fax/IP Address FAX Operation
8
Scanner Mode 8-45
8.10 Receiving Documents (POP3 Reception)
Receiving Internet faxes
● The network settings must be specified. → Refer to page 3-3.
If the “Auto-RX Check” parameter is set to “Check OFF”, an Internet
fax cannot be received. The factory settings is “Check OFF”.
Therefore, in order to automatically receive Internet faxes, specify a
time interval for the “Auto-RX Check” parameter.
● The received documents can be printed or saved in a box. Refer to
“Specifying the procedure for received documents (“Doc. Manage.”
function)” on page 13-33.
● If the “Auto-RX Check” parameter is set to “Check OFF” or if you wish
to immediately receive the fax, the fax can be received manually.
● The setting for specifying the answering method for fax settings in the
Administrator Management screen is available only when sending
faxes on a common telephone line. It is not available when receiving
Internet faxes.
Manually receiving faxes
1 Press the [Utility] key.
2 Touch [User Management].
3 Touch [POP3 RX].
If there are e-mail messages
at the POP3 server, the e-
mail messages are received.
While e-mail messages are
being received, appears.
✎
Tip
E-mail messages can be
received in any of the
following four formats:
Text
TIFF-F image
Text/TIFF-F image
DSN, MDN