Filter
Top Products
Troubleshooting
15
Scanner Mode 15-3
15.2 Transmission Results Error Codes
The following error codes appear in transmission activity report, reception
activity report and the Job List screen.
Precautions
● If a malfunction occurs during the operation of a network application
function, an error code appears in the Job List screen or report. Refer
to “Checking Transmission Results” on page 8-40. In addition, refer to
“Reports and lists” on page 14-1.
Scan to Server (FTP) transmissions
Error
Code
Cause Remedy
Page
referen
ce
ED2502 The LAN cable is not connected
correctly or the transmission to
the FTP server failed. Otherwise,
an attempt was made to send the
data to the wrong recipient.
Check that the LAN cable is
correctly connected, and check
that the FTP server address and
port number and the proxy server
address and port number
settings are correctly specified.
p. 3-1,
p. 3-18,
p. 3-22
ED2503 Login could not be completed
because the user name or the
password is incorrect.
Check the user name and
password settings.
p. 3-18
ED2504 The specified folder is incorrect. Check the folder name setting. p. 3-18
ED2505 The FTP server disk is full. Ensure that there is enough disk
space.
-
ED2506 AN error occurred while
forwarding data to the FTP
server.
Check that the LAN cable is
correctly connected, and that
transmission to the FTP server is
possible.
p. 3-1
ED2508 An error other than those listed
above occurred with the FTP
server.
Check that the FTP server can
transmit.
-
EF2509 The memory has become full. Change the resolution to “Fine”
or “Standard”.
p. 5-8