Filter
Top Products
Preparation
3
Scanner Mode 3-27
Selecting the Display Language
If necessary, the language in which PageScope Light pages are displayed
can be changed. This setting only applies to PageScope Light pages.
1 Log into PageScope Light in Administrator mode.
2 Click [Preference] in the menu on the [System] tab.
3 Select the desired language for PageScope Light.
4 Click the [Apply] button.
3.2.4 Using the Domain Name Buttons
If domain names (characters after @ at the end of the e-mail address,
such as “@xyz.com”) are registered in the domain name buttons, recipient
e-mail addresses can quickly and correctly be specified.
Programming a domain name button
1 Press the [Utility] key on the copier control panel.
2 Touch [User Set].
3 Touch [Fax Input].
❍ For a copier, touch [E-mail Input].