Filter
Top Products
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
8-10 Virtual Private Networking Using SSL Connections
v1.0, January 2010
Table 8-4. SSL VPN Wizard Step 4:
Client IP Address Range and Routes Settings
Item Description (or Subfield and Description)
Client IP Address Range
Enable Full Tunnel Support Select this checkbox to enable full tunnel support. If you leave this
checkbox deselected (which is the default setting), split tunnel support is
enabled, and you must add a client route by completing the Destination
Network and Subnet Mask fields.
Note: When full tunnel support is enabled, client routes are not operable.
DNS Suffix A DNS suffix to be appended to incomplete DNS search strings. This is
an option.
Primary DNS Server The IP address of the primary DNS server that is assigned to the VPN
tunnel clients. This is an option.
Note: If you do not assign a DNS server, the DNS settings remain
unchanged in the VPN client after a VPN tunnel has been established.
Secondary DNS Server The IP address of the secondary DNS server that is assigned to the VPN
tunnel clients. This is an option.
Client Address Range Begin The first IP address of the IP address range that you want to assign to
the VPN tunnel clients.
Client Address Range End The last IP address of the IP address range that you want to assign to
the VPN tunnel clients.
Add Routes for VPN Tunnel Clients
Destination Network Leave this field blank or specify a destination network IP address of a
local network or subnet that has not yet been used.
Subnet Mask Leave this field blank to specify the address of the appropriate subnet
mask.