Filter
Top Products
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Monitoring System Access and Performance 11-23
v1.0, January 2010
Table 11-11 on page 11-24 explains the Interface Statistics section of the System Status screen.
Table 11-10. System Status: WAN Configuration and LAN Port Information
Setting Description (or Subfield and Description)
WAN1 Configuration/WAN2 Configuration (Dual-WAN Port Models)
or
WAN Configuration (Single-WAN Port Models)
WAN Mode Single Port, Load Balancing, or Auto Rollover.
WAN State UP or DOWN.
NAT Enabled or Disabled.
Connection Type Static IP, DHCP, PPPoE, or PPTP.
Connection State Connected or Not Connected.
IP Address
These fields are self-explanatory.
Subnet Mask
Gateway
Primary DNS
Secondary DNS
MAC Address
LAN Port
MAC Address
These fields are self-explanatory.
IP Address
DHCP DHCP or None.
IP Subnet Mask This field is self-explanatory.
Figure 11-12 [System Status, screen 3 of 3]