Filter
Top Products
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
3-12 Manually Configuring Internet and WAN Settings
v1.0, January 2010
To configure the dual-WAN ports for auto-rollover mode:
1. Select Network Config > WAN Settings from the menu, then click the WAN Mode tab. The
WAN Mode screen displays.
2. Enter the settings as explained in Table 3-5.
Figure 3-8
Table 3-5. Auto-Rollover Mode Settings (Dual-WAN Port Models Only)
Setting Description (or Subfield and Description)
Port Mode
Auto-Rollover using
WAN port
Select the Auto-Rollover using WAN port radio button. Then, from the pull-down
menu, select the WAN port that must function as the as the primary link for this
mode.
Note: Ensure that the backup WAN port is configured before enabling Auto-
Rollover mode.