NETGEAR UTM5-100NAS Network Hardware User Manual


 
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Managing Users, Authentication, and Certificates 9-7
v1.0, January 2010
Creating and Deleting Groups
To create a VPN group:
1. Select Users > Groups from the menu. The Groups screen displays. Figure 9-3 shows the
UTM’s default group—geardomain—and, as an example, several other groups in the List of
Groups table.
The List of Groups table displays the VPN groups with the following fields:
Checkbox. Allows you to select the group in the table.
Name. The name of the group. If the group name is appended by an asterisk, the group
was created by default when you created the domain with the identical name as the default
group.You cannot delete a default group; you can only delete the domain with the identical
name, which causes the default group to be deleted.
Domain. The name of the domain to which the group is assigned.
Action. The Edit table button that provides access to the Edit Group screen.
2. In the Add New Group section of the screen, enter the settings as explained in Table 9-3 on
page 9-8.
Figure 9-3