Filter
Top Products
Page: 80
Service Guide OJ2010
Chapter 3 Maintenance and Disassembly
3.2.23 Paper Guide and End of Form (EOF) Flag Assembly
1. Remove the preliminary items. . . . . . . . . .
(3.2.01
)
2. Remove the front cover. . . . . . . . . . . . . . . .
(3.2.12
)
3. Remove the rear cover. . . . . . . . . . . . . . . .
(3.2.30
)
4. Remove the carrier frame assembly. . . .
(3.2.04
)
5. Remove the system board. . . . . . . . . . .
(3.2.33
)
6. Remove the encoder strip. . . . . . . . . . . .
(3.2.10
)
7. Remove the three small feed roll springs (1).
8. Push the locking tabs (2) to the rear and pull the paper guide down and out of the carrier frame.
NOTE:
Installation
Be sure that the small feed roll spring extensions (4) are in the grooves of the small feed roll arms.
Be sure that the short extensions of the two paper flap springs are trapped under the carrier frame
(5).