Filter
Top Products
or Maximum.
Check the paper being used.
Make sure that the correct type of paper is being used.
Make sure that the paper is straight and unwrinkled.
Let the ink dry before handling the paper.
In the Printer Setup Dialog box, click the Media / Quality tab, then change Print Quality to Draft.
Clean the print cartridge nozzles. Refer to Section 3.4 of this Service Handbook , Print the Nozzle
Test .
Characters With White Lines
Check the print cartridges.
Check the ink level by clicking on the Cartridges tab in the Printer Control Dialog box.
Remove and reinstall the print cartridge. Refer to Section 3.7 of this Service Handbook .
Clean the print cartridge nozzles. Refer to Section 3.4 of this Service Handbook , Print the Nozzle
Test .
If printing on transparencies, try changing the fill pattern in the application software.
Improperly Formed Or Misaligned Characters
Clean the print cartridge nozzles. Refer to Section 3.4 of this Service Handbook , Print the Nozzle
Test .
Characters Do Not Align Correctly At The Left Margin
Make sure that there are no hard-coded spaces at the left margin.
Clean the print cartridge nozzles. Refer to Section 3.4 of this Service Handbook , Print the Nozzle
Test .
Vertical Straight Lines Are Not Smooth In Tables, Borders, And Graphs
Clean the print cartridge nozzles. Refer to Section 3.4 of this Service Handbook , Print the Nozzle
Test .
If high speed mode is being used, perform the printhead alignment. Refer to Section 3.3 of this
Service Handbook .
In the printer setup dialog box, click the Media / Quality tab, then turn off the High Speed option.
Black Portions Of Graphics Do Not Align With Color Portions
Perform the printhead alignment. Refer to Section 3.3 of this Service Handbook .
Solid Black Areas On Transparencies Contain White Streaks
Try using a different fill pattern in the application software.