Filter
Top Products
6. Check the sheet feeder.
Check the pick rollers for wear or damage.
Check the envelope bucklers for wear or damage.
Check all the parts inside the left and right edge guides for wear or damage.
7. Check the end-of-forms flag spring.
Check the spring for binds or damage.
8. Check the ejectors.
After the paper exits from the feed rollers, the paper feed motor reverses.
This causes the paper ejectors to move the last sheet of paper into the exit tray.
If the ejectors do not move or restore, check them for worn, loose, or broken
parts.
Be sure that the ejectors are connected to the large feed roller shaft.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)