Filter
Top Products
Page: 121
Service Guide OJ2010
Chapter 4 Failure and Repair Analysis
4.4.04 Tips for Preventing Image Problems
1. Make sure that the print cartridges are not "used up". If the printer output is faded, install a new print
cartridge, then print another sample.
2. Make sure that the paper you are using is within specifications. Paper specifications can be found in
Section 1 of this Service Handbook.
3. Always perform the Printhead Alignment Adjustment after installing a print cartridge.
Refer to Section 3.3 of this Service Handbook for details about the Printhead Alignment
Adjustment .
4. Perform the Print the Nozzle Test to clean the nozzles.
Refer to Section 3.4 of this Service Handbook for details about the Print the Nozzle Test
.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)