Filter
Top Products
February 2003 5-13
1000-A2-GN22-00 5. Repair Procedures
Hot Growth You can add cards to the CPX without losing calls or rebooting the
CP or MP cards or the CPX-1000.
To add a card, refer to JetVision User’s Guide and:
Step 1 Insert a card to its assigned slot.
Step 2 Snap the card ejectors into the locked position.
Step 3 Select Refresh in JetCraft to see the new card(s).
Step 4 Provision the cards, as required.
Note
Insert the transition card first, then insert the front card.
Important
Do not force a card into place—this may cause damage to
the connector pins.