Filter
Top Products
A. Using the Console 1000-A2-GN22-00
A-2 February 2003
Step 2 Type the target IP address and the CP port number (5050 for CP-A
or 6050 for CP-B). The Console window appears.
Step 3 Enter the user or admin name and password (Figure A–1).
Figure A–1. Console Window
Notes
Command lines are not case-sensitive; they automatically
converted to lower case upon entry. The Up and Down
arrows show the command history.
To allow spaces in a command line argument, surround the
whole argument in double-quotes.
Press the ESCAPE key to cancel the current command line.
Enter user name
and password here
Indicates the current
CP selected and its
status
Table A–1. CP High Availability States
State Description
AC Active
HS Hot Standby
GA Going Active
GS Going Hot Standby
UK Unknown
?? Error
CS Cold Standby