Filter
Top Products
February 2003 A-9
1000-A2-GN22-00 A. Using the Console
portloop Establishes a voice path between two subscriber ports.
Cpx>
portloop on <sub1> <port1> <sub2> <port2>
— Establishes a voice path between the two
ports
Cpx>
portloop off <sub1> <port1> <sub2>
<port2>
—Disconnects a previously established portloop
reboot Reboots the CP
Cpx>
reboot verify
restartsub Sends a restart request to a subscriber
Cpx>
restartsub <sub> [<immed>]
Where:
<immed> = 0 = Wait until <sub> has no active calls (default)
<immed> = 1 = Restart immediately
setactiveport Sets the active port in an ATM port group
Cpx>
setactiveport <portgroup> <port>
setcdv Displays/sets ATM Cell Delay Variation (CDV)
Cpx>
setcdv
—Displays current Cell Delay Variation
Cpx>
setcdv <newcdv>
—Sets a new Cell Delay Variation
Where:
<newcdv> = Maximum jitter to tolerate in received cells from
subscribers (in milliseconds)
setechocancel Sets Echo Cancellation type for a given subscriber port
Cpx>
setechocancel <sub> <port> none|far
—Sets Echo
Cancellation for one port on a subscriber
Cpx>
setechocancel <sub> all none|far
—Sets Echo
Cancellation for all ports on a subscriber
Note
This setting is a temporary override only and is overwritten by
any reprovisioning.