Filter
Top Products
WR3000 4-Port Wireless DSL/Cable Router
®
105
13.4 Confi guring FTP
You can upload and download the WR3000 Wireless Router’s fi rmware and confi guration fi les
using FTP, please see the chapter on fi rmware and confi guration fi le maintenance for details.
To use this feature, your computer must have an FTP client.
To change your WR3000 Wireless Router’s FTP settings, click
ADVANCED
,
REMOTE
MANAGEMENT
and then the
FTP
tab. The screen appears as shown.
The following table describes the labels in this screen.
FTP
LABEL
DESCRIPTION
DESCRIPTION
Server Port
Server Port
You may change the server port number for a service if needed, however, you must
You may change the server port number for a service if needed, however, you must
use the same port number in order to use that service for remote management.
use the same port number in order to use that service for remote management.
Server Access
Server Access
Select the interface(s) through which a computer may access the WR3000 Wireless
Select the interface(s) through which a computer may access the WR3000 Wireless
Router using this service.
Secured Client
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate with the WR3000
A secured client is a “trusted” computer that is allowed to communicate with the WR3000
Wireless Router using this service.
Select
All
to allow any computer to access the WR3000 Wireless Router using this
service.
Choose
Selected
to just allow the computer with the IP address that you specify to
access the WR3000 Wireless Router using this service.
Apply
Click
Click
Apply
to save your changes back to the WR3000 Wireless Router.
Reset
Click
Click
Reset
to begin confi guring this screen afresh.
to begin confi guring this screen afresh.
Apply Reset
REMOTE MANAGEMENT
Server Port
21
Server Access
LAN
Secured Client IP Address
All
Selected
0.0.0.0
TELNET
FTP
FTP
WWW
SNMP
DNS
Security