Filter
Top Products
WR3000 4-Port Wireless DSL/Cable Router
®
82
10.2 Confi guring IP Static Route
Click
ADVANCED
and then
STATIC ROUTE
to open the screen shown next.
The following table describes the labels in this screen.
IP Static Route Summary
LABEL
DESCRIPTION
DESCRIPTION
#
#
This fi eld displays an individual static route index number.
This fi eld displays an individual static route index number.
Name
This fi eld displays the name that describes or identifi es this route.
This fi eld displays the name that describes or identifi es this route.
Active
This fi eld shows whether this static route is active (Yes) or not (No).
This fi eld shows whether this static route is active (Yes) or not (No).
Destination
This parameter specifi es the IP network address of the fi nal destination. Routing is
This parameter specifi es the IP network address of the fi nal destination. Routing is
always based on network number.
Gateway
Gateway
This fi eld displays the IP address of the gateway. The gateway is an immediate
This fi eld displays the IP address of the gateway. The gateway is an immediate
neighbor of your WR3000 Wireless Router that will forward the packet to the destination.
On the LAN, the gateway must be a router on the same segment as your WR3000
Wireless Router; over the WAN, the gateway must be the IP address of one of the
remote nodes.
Edit
To set up a static route on the WR3000 Wireless Router, click the radio button next
to the static route index number you want to confi gure, then click
Edit
to
go
to the
Static Route -Edit
screen.
Delete
To remove a static route on the WR3000 Wireless Router, click the radio button next to the
static route index number you want to remove, then click
Delete.
Edi
t
Delete
S
TAT
IC ROUT
E
IP
Static Rout
e
Name
Active
Destinatio
n
Gatewa
y
#
1
2
3
4
5
6
7
8