WR3000 4-Port Wireless DSL/Cable Router
®
55
7.8 Introduction to Local User Database
By storing user profi les locally on the WR3000 Wireless Router, your WR3000 Wireless Router is
able to authenticate wireless users without interacting with a network RADIUS server. However,
there is a limit on the number of users you may authenticate in this way.
To change your WR3000 Wireless Router’s authentication settings, click
. The screen appears as shown below.
The following table describes the settings on this screen.
To control wireless stations access to the wired network, select a control method from the
To control wireless stations access to the wired network, select a control method from the
drop-down list box. Choose from
No Authentication Required, Authentication Required
No Authentication Required
allows all wireless stations access to the wired network without
entering usernames and passwords. This is the default setting.
means that all wireless stations have to enter usernames and
passwords before access to the wired network is allowed.
blocks all wireless stations access to the wired network.
Specify how often wireless stations have to reenter usernames and passwords in order to
Specify how often wireless stations have to reenter usernames and passwords in order to
stay connected. This fi eld is activated only when you select
Enter a time interval between 10 and 9999 seconds. The default time interval is
If wireless station authentication is done using a RADIUS server,
If wireless station authentication is done using a RADIUS server,
the reauthentication timer on the RADIUS server has priority.
If wireless station authentication is done using a RADIUS server,
the reauthentication timer on the RADIUS server has priority.
If wireless station authentication is done using a RADIUS server,
The WR3000 Wireless Router automatically disconnects a wireless station from the wired
The WR3000 Wireless Router automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed.
This fi eld is activated only when you select
fi eld. The default time interval is
Table continued on the next page.
Local User
Database
MAC Filter
Roaming
802.1x
Apply Reset
WIRELESS LAN
Wireless
RADIUS
802.1x Authentication
Wireless Port Control
No Authentication Required
ReAuthentication Timer
1800
(In Seconds)
(In Seconds)
Idle Timeout
3600
Authentication Databases
Dynamic WEP Key Exchange
Disable
Local User Database Only
