Filter
Top Products
WR3000 4-Port Wireless DSL/Cable Router
®
148
18.1.3 Procedure to Confi gure Dynamic DNS - Continued
Menu 1.1 Confi gure Dynamic DNS - Continued
FIELD
DESCRIPTION
DESCRIPTION
EXAMPLE
Use Server
Use Server
Detected IP
Press [SPACE BAR] to select
Press [SPACE BAR] to select
Yes
and then press [ENTER] to have
the DDNS server automatically update the IP address of the host
name(s) with the public IP address that the WR3000 Wireless Router
uses or is behind.
You can set this fi eld to
Yes
whether the IP address is public or
private, static or dynamic.
Yes
User Specifi ed IP
User Specifi ed IP
Address
Press [SPACE BAR] to select
Press [SPACE BAR] to select
Yes
and then press [ENTER] to
update the IP address of the host name(s) to the IP address
specifi ed below.
Only select
Only select
Yes
Yes
if the WR3000 Wireless Router uses or is
if the WR3000 Wireless Router uses or is
behind a static public IP address.
No
IP Address
Enter the static public IP address if you select
Enter the static public IP address if you select
Yes
in the
User
Specifi ed IP Addr
fi eld.
N/A
N/A
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
your confi guration, or press [ESC] at any time to cancel.
18.2 WAN Setup
The MAC address fi eld allows users to confi gure the WAN port’s MAC address by either
using the factory default or cloning the MAC address from a computer on your LAN. Once it
is successfully confi gured, the address will be copied to the rom fi le. It will not change unless
you change the setting or upload a different rom fi le.
ParkerVision recommends you clone the MAC address from a workstation on your LAN
even if your ISP does not require MAC address authentication.
From the main menu, enter 2 to display Menu 2-WAN Setup screen as shown.
The table on the following page describes the fi elds in this menu.