ParkerVision WR3000 Network Router User Manual


 
WR3000 4-Port Wireless DSL/Cable Router
®
32
4.4 Confi guring Dynamic DNS
To change your WR3000’s
DDNS
, click
ADVANCED
,
SYSTEM
and then the
DDNS
tab. The
screen appears as shown.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
DESCRIPTION
Active
Select this check box to activate DDNS.
Select this check box to activate DDNS.
Service Provider
Service Provider
Select the name of your DDNS service provider.
Select the name of your DDNS service provider.
DDNS Type
DDNS Type
Select the type of service that you are registered for from your DDNS service provider.
Select the type of service that you are registered for from your DDNS service provider.
Options are
Dynamic DNS, Static DNS
or
Custom DNS.
Host Names 1-3
Enter your host names in the three fi elds provided. You can specify up to two host
Enter your host names in the three fi elds provided. You can specify up to two host
names in each fi eld separated by a comma (“,”).
User
User
Type your user name.
Type your user name.
Password
Type the password assigned to you.
Enable Wildcard
Your WR3000 supports DYNDNS wildcard. Select the check box to enable.
Your WR3000 supports DYNDNS wildcard. Select the check box to enable.
Off Line
Off Line
This option is available when
CustomDNS
CustomDNS
is selected in the
DDNS Type
DDNS Type
fi eld. Check with
fi eld. Check with
your dynamic DNS service provider to have traffi c redirected to a URL (that you can specify)
while you are off line.
Edit Update IP Address:
Server Auto Detect
Server Auto Detect
Select this option to update the IP address of the host name(s) automatically by the DDNS
Select this option to update the IP address of the host name(s) automatically by the DDNS
server. It is recommended that you select this option.
User Specify
User Specify
Select this option to update the IP address of the host name(s) to the IP address specifi ed
Select this option to update the IP address of the host name(s) to the IP address specifi ed
below. Use this option if you have a static IP address.
IP Address
Enter the IP address if you select the
Enter the IP address if you select the
User Specify
User Specify
option.
Apply
Click
Click
Apply
to save your changes back to the WR3000.
Reset
Click
Click
Reset
to reload the previous confi guration for this screen.
to reload the previous confi guration for this screen.
SYSTEM
Time Setting
Active
Service Provider
DDNS Type
www.DynDNS.ORG
Dynamic DNS
Host Name 1
Host Name 2
Host Name 3
Password
Enable Wildcard
Off Line
Edit Update IP Address:
Server Auto Detect
User Specify
IP Address
0.0.0.0
General
DDNS
Password
Apply Reset
User