Filter
Top Products
WR3000 4-Port Wireless DSL/Cable Router
®
143
17.5 Navigating the SMT Interface
Several operations that you should be familiar with before you attempt to modify the
confi guration are listed in the table below.
Main Menu Commands
OPERATION
OPERATION
KEYSTROKE
KEYSTROKE
DESCRIPTION
DESCRIPTION
Move down to
another menu
[ENTER]
To move forward to a submenu, type in the number of the desired
To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
Move up to a
previous menu
[ESC]
[ESC]
Press [ESC] to move back to the previous menu.
Press [ESC] to move back to the previous menu.
Move to a “hidden”
Move to a “hidden”
menu
Press [SPACE
Press [SPACE
BAR] to change No
to
Yes
then press
[ENTER].
Fields beginning with “Edit” lead to hidden menus and have a
Fields beginning with “Edit” lead to hidden menus and have a
default setting of No. Press [SPACE BAR] once to change No to
Yes,
then press [ENTER] to go to the “hidden” menu.
Move the cursor
[ENTER] or [UP]/
[ENTER] or [UP]/
[ENTER] or [UP]/
[DOWN] arrow keys.
Within a menu, press [ENTER] to move to the next fi eld. You can
Within a menu, press [ENTER] to move to the next fi eld. You can
Within a menu, press [ENTER] to move to the next fi eld. You can
also use the [UP]/[DOWN] arrow keys to move to the previous
and the next fi eld, respectively.
Entering
information
Type in or press
[SPACE BAR], then
press [ENTER].
You need to fi ll in two types of fi elds. The fi rst requires you to type
You need to fi ll in two types of fi elds. The fi rst requires you to type
in the appropriate information. The second allows you to cycle
through the available choices by pressing [SPACE BAR].
Required fi elds
Required fi elds
<?> or
<?> or
ChangeMe
ChangeMe
All fi elds with the symbol <?> must be fi lled in order to be able to
All fi elds with the symbol <?> must be fi lled in order to be able to
save the new confi guration.
All fi elds with
ChangeMe
must not be left blank in order to be
able to save the new confi guration.
N/A fi elds
N/A fi elds
<N/A>
<N/A>
Some of the fi elds in the SMT will show a <N/A>. This symbol
Some of the fi elds in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
Save your
Save your
confi guration
[ENTER]
Save your confi guration by pressing [ENTER] at the message
Save your confi guration by pressing [ENTER] at the message
“Press ENTER to confi rm or ESC to cancel”. Saving the data on
the screen will take you, in most cases to the previous menu.
Exit the SMT
Exit the SMT
Type 99, then press
[ENTER].
Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
After you enter the password, the SMT displays the main menu as shown on the next page.