
WR3000 4-Port Wireless DSL/Cable Router
®
147
18.1.3 Procedure to Confi gure Dynamic DNS - Continued
The following table describes the fi elds in this menu.
Menu 1.1 Confi gure Dynamic DNS
This is the name of your Dynamic DNS service provider.
This is the name of your Dynamic DNS service provider.
Press [SPACE BAR] to select
Press [SPACE BAR] to select
and then press [ENTER] to make
Press [SPACE BAR] and then [ENTER] to select
Press [SPACE BAR] and then [ENTER] to select
you have a dynamic IP address(es). Select
to have dyns.org provide DNS service for
a domain name that you already have from a source other than
Enter your host name(s) in the fi elds provided. You can specify up to
Enter your host name(s) in the fi elds provided. You can specify up to
two host names separated by a comma in each fi eld.
Enter the password assigned to you.
Enter the password assigned to you.
Your WR3000 Wireless Router supports DYNDNS wildcard. Press
Your WR3000 Wireless Router supports DYNDNS wildcard. Press
[SPACE BAR] and then [ENTER] to select
when you choose DDNS client as your service provider.
This fi eld is only available when
This fi eld is only available when
fi eld. Press [SPACE BAR] and then [ENTER] to select
is selected, traffi c is redirected to a URL that you
have previously specifi ed (see
fi eld (recommended) or the
automatically updates the IP address of the host name(s) with the WR3000 Wireless Router’s WAN IP
DDNS does not work with a private IP address. When both fi elds are set to
the WR3000 Wireless Router
must have a public WAN IP address in order for DDNS to work.
Continued on the next page.