Filter
Top Products
WR3000 4-Port Wireless DSL/Cable Router
®
19
3.2 Wizard Setup: General Setup
General Setup
contains administrative and system-related information.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
DESCRIPTION
System Name
System Name
It is recommended you type your computer’s “Computer name”, some ISPs check this name
It is recommended you type your computer’s “Computer name”, some ISPs check this name
you should enter your computer’s “Computer Name”.
> In Windows 2000, click
Start, Settings, Control Panel
and then double-click
System.
Click the
Network Identifi cation
tab and then the
Properties
button. Note the entry for the
Computer name
fi eld and enter it as the
System Name.
> In Windows XP, click
Start, My Computer, View system information
and then click the
Computer Name
tab. Note the entry in the
Full computer name
fi eld and enter it as the
WR3000 Wireless Router
WR3000 Wireless Router
System Name.
System Name.
This name can be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes”-” and underscores”_” are accepted.
Domain Name
The
Domain Name
entry is what is propagated to the DHCP clients on the LAN. Type the
entry is what is propagated to the DHCP clients on the LAN. Type the
domain name (if you know it) here. If you leave this fi eld blank, the ISP may assign a domain
name via DHCP. The domain name entered by you is given priority over the ISP assigned
domain name.
Next
Click
Click
Next
to proceed to the next screen.
WIZARD
General Setup:
This information is optional, but may be helpful in accessing services of your Internet Service
Provider, such as mail and news servers and customer support web pages.
Enter a descriptive name for identification purposes. We recommend using your computer’s name.
System Name:
The ISP’s domain name is often sent automatically by the ISP to the router. If you are having
difficulty accessing ISP services, you may need to enter the Domain Name manually in the field
below.
Domain Name:
parkervision.com