Filter
Top Products
WR3000 4-Port Wireless DSL/Cable Router
®
80
9.4.1 Confi guring Address Mapping Rule
To edit an address mapping rule, click the
Edit
button to display the screen shown next.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
DESCRIPTION
Type
Choose the port mapping type from the drop down list.
Choose the port mapping type from the drop down list.
Local Start IP
This is the starting local IP address (ILA). Local IP addresses are N/A for
Server
Server
port
mapping.
Local End IP
This is the end local IP address (ILA). If your rule is for all local IP addresses, then
This is the end local IP address (ILA). If your rule is for all local IP addresses, then
enter 0.0.0.0 as the
Local Start IP
address and 255.255.255.255 as the
Local End
IP
address.
This fi eld is
N/A
for
One-to-One
and
Server
mapping types.
Global Start IP
Global Start IP
This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have a dynamic IP
This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have a dynamic IP
address from your ISP.
Global End IP
Global End IP
This is the ending global IP address (IGA). This fi eld is
This is the ending global IP address (IGA). This fi eld is
N/A
N/A
for
for
One-to-One, Many-to-
One-to-One, Many-to-
One
and
Server
mapping types.
Apply
Click
Click
Apply
to save your changes back to the WR3000 Wireless Router.
Cancel
Cancel
Click
Click
Cancel
Cancel
to exit this screen without saving.
Apply Cancel
Address Mapping Rule
SUA/NAT - Address Mapping
Type
One-to-One
Local Start IP
0.0.0.0
0.0.0.0
Local End IP
N/A
Global Start IP
Global End IP
N/A