A SERVICE OF

logo

Open as PDF
next previous
WR3000 4-Port Wireless DSL/Cable Router
®
78
9.3 Confi guring SUA Server
If you do not assign a Default Server IP address, then all packets received for ports
not specifi ed in this screen will be discarded.
Click
ADVANCED
and then
SU A/NAT
to open the SUA Server screen. Refer to the table in the
previous section for port numbers commonly used for particular services.
The table below describes the settings in this screen.
LABEL
DESCRIPTION
DESCRIPTION
Default Server
Default Server
In addition to the servers for specifi ed services, NAT supports a default server. A default
In addition to the servers for specifi ed services, NAT supports a default server. A default
server receives packets from ports that are not specifi ed in this screen. If you do not
assign a default server IP address, then all packets received for ports not specifi ed in this
assign a default server IP address, then all packets received for ports not specifi ed in this
screen will be discarded.
#
#
This fi eld displays the number of an individual SUA server entry.
This fi eld displays the number of an individual SUA server entry.
Active
Select this check box to enable the SUA server entry. Clear this checkbox to disallow
Select this check box to enable the SUA server entry. Clear this checkbox to disallow
forwarding of these ports to an inside server without having to delete the entry.
Name
Enter a name to identify this port-forwarding rule.
Enter a name to identify this port-forwarding rule.
Start Port
Start Port
End Port
Enter a port number here.
To forward only one port, enter the port number in the
Start Port
fi eld and then type it
again in the
End Port
fi eld.
To specify a range of ports, enter the start port number in the
Start Port
fi eld and the
last port to be forwarded in the
End Port
fi eld.
Server IP
Server IP
Address
Enter the inside IP address of the server here.
Enter the inside IP address of the server here.
Apply
Click
Click
Apply
to save your changes back to the WR3000 Wireless Router.
Reset
Click
Click
Reset
to begin confi guring this screen afresh.
to begin confi guring this screen afresh.
Address Mapping
Apply Reset
SUA/NAT
SUA Server
Default Server
0.0.0.0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Active
Name Start Port
End Port
Server IP Address
#
1
2
3
4
5
6
7
8
9
10
11