ParkerVision WR3000 Network Router User Manual


 
WR3000 4-Port Wireless DSL/Cable Router
®
24
3.4.3 PPPoE Encapsulation - Continued
PPoE Wizard Setup Screen
The following table describes the labels in this screen.
LABEL
DESCRIPTION
DESCRIPTION
ISP Parameter for Internet Access
ISP Parameter for Internet Access
ISP Parameter for Internet Access
ISP Parameter for Internet Access
Encapsulation
Choose an encapsulation method from the pull-down list box. PPPoE forms a dial-up
connection.
Service Name
Service Name
Type the name of your service provider.
Type the name of your service provider.
User Name
Type the user name given to you by your ISP.
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Nailed Up
Connection
Select
Select
Nailed Up Connection
Nailed Up Connection
if you do not want the connection to time out.
if you do not want the connection to time out.
Idle Timeout
Type the time in seconds that elapses before the WR3000 Wireless Router automatically
Type the time in seconds that elapses before the WR3000 Wireless Router automatically
disconnects from the PPPoE server.
Next
Click
Next
to continue.
Back
Click
Click
Back
to return to the previous screen.
WIZARD
Back Next
PPP over Ethernet
ISP Parameters for Internet Access
Encapsulation
Service Name
Password
Nailed-Up Connection
Idle Timeout
100
(In Seconds)
User Name