ParkerVision WR3000 Network Router User Manual


 
WR3000 4-Port Wireless DSL/Cable Router
®
152
19.2 TCP/IP Ethernet and DHCP Setup - Continued
Follow the instructions in the table below to confi gure the DHCP fi elds.
DHCP Ethernet Setup
FIELD
DESCRIPTION
DESCRIPTION
EXAMPLE
DHCP
DHCP
If set to
If set to
Server,
Server,
your WR3000 Wireless Router can assign IP
addresses, an IP default gateway and DNS servers to Windows 95,
Windows NT and other systems that support the DHCP client.
If set to
None,
the DHCP server will be disabled. If set to
Relay,
the
WR3000 Wireless Router acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the
clients. Enter the IP address of the actual, remote DHCP server in the
Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
When DHCP is used, the following items need to be set:
Server
(default)
Starting Address
Starting Address
This fi eld specifi es the fi rst of the contiguous addresses in the IP
This fi eld specifi es the fi rst of the contiguous addresses in the IP
address pool.
192.168.150.32
Size of Client IP Pool
Size of Client IP Pool
This fi eld specifi es the size or count of the IP address pool.
This fi eld specifi es the size or count of the IP address pool.
32
First DNS Server
Second DNS Server
Third DNS Server
Press [SPACE BAR] to select
From ISP, User Defi ned, DNS Relay
From ISP, User Defi ned, DNS Relay
or
None
and press [ENTER].
The DNS servers are passed to the DHCP clients along with the IP
address and the subnet mask.
From ISP
From ISP
IP Address
Enter the IP addresses of the DNS servers. This fi eld is available
when you select User-Defi ned in the fi eld above.
N/A
DHCP Server
DHCP Server
Address
If
If
Relay
is selected in the
DHCP
DHCP
fi eld above then enter the IP address
fi eld above then enter the IP address
of the actual remote DHCP server here.
Follow the instructions in the following table to confi gure TCP/IP parameters for the Ethernet port.
TCP/IP Ethernet Setup
FIELD
DESCRIPTION
DESCRIPTION
EXAMPLE
TCP/IP Setup
IP Address
Enter the (LAN) IP address of your WR3000 Wireless Router in dotted
Enter the (LAN) IP address of your WR3000 Wireless Router in dotted
decimal notation
192.168.150.1
IP Subnet Mask
IP Subnet Mask
Your WR3000 Wireless Router will automatically calculate the subnet
mask based on the IP address that you assign. Unless you are
implementing subnetting, use the subnet mask computed by the
WR3000 Wireless Router.
255.255.255.0
RIP Direction
Press [SPACE BAR] to select the RIP direction. Choices are
Press [SPACE BAR] to select the RIP direction. Choices are
Both, In
Only, Out Only
or
None.
Both
Continued on the next page.