Filter
Top Products
WR3000 4-Port Wireless DSL/Cable Router
®
63
8.2.1 Ethernet Encapsulation Service Type - Continued
The following table describes the labels on the screen on the preceding page.
LABEL
DESCRIPTION
DESCRIPTION
Encapsulation
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Service Type
Service Type
Select from
Select from
Standard, RR-Toshiba
Standard, RR-Toshiba
(RoadRunner Toshiba authentication method),
(RoadRunner Toshiba authentication method),
RR-Manager
(Roadrunner Manager authentication method)
RR-Telstra
or
Telia
Login.
Choose a Roadrunner service type if your ISP is Time Warner’s Roadrunner;
otherwise choose
Standard.
User Name
Enter the username given to you by your ISP.
Enter the username given to you by your ISP.
Password
Enter the password associated with the login name above.
Retype to
Confi rm
Confi rm
Type your password again here to ensure that what you entered in the
Password
fi eld above was what you intended.
fi eld above was what you intended.
Login Server IP
Login Server IP
Address
The WR3000 Wireless Router will fi nd the Roadrunner Server IP address if this
The WR3000 Wireless Router will fi nd the Roadrunner Server IP address if this
fi eld is left blank. If it does not, then you must enter the authentication server IP
address.
Login Server (Telia
Login Server (Telia
Login only)
Type the domain name of the Telia login server, for example “logini .telia.com”.
Type the domain name of the Telia login server, for example “logini .telia.com”.
This fi eld is not available on all models.
Relogin Every(min)
Relogin Every(min)
(Telia Login only)
The Telia server logs the WR3000 Wireless Router out if the WR3000 Wireless
The Telia server logs the WR3000 Wireless Router out if the WR3000 Wireless
Router does not log in periodically. Type the number of minutes from 1 to 59 (30
recommended) for the WR3000 Wireless Router to wait between logins.
This fi eld is not available on all models.
Apply
Click
Click
Apply
to save your changes back to the WR3000 Wireless Router.
Reset
Click
Click
Reset
to begin confi guring this screen afresh.
to begin confi guring this screen afresh.
8.2.2 PPPoE Encapsulation
PPPoE (Point-to-Point Protocol over Ethernet) is an IETF Draft standard (RFC 2516) specifying
how a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.)
how a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.)
connection. The PPP over Ethernet option is for a dial-up connection using PPPoE.
The screen shown on the next page is for PPP over Ethernet encapsulation.