Filter
Top Products
WR3000 4-Port Wireless DSL/Cable Router
®
138
16.6.3 Back to Factory Defaults
Clicking the Reset button in this section clears all user-entered confi guration information and
returns the WR3000 Wireless Router to its factory defaults as shown on the screen. This will
erase all confi gurations that you have applied.
Click the Default tab to display the screen shown next.
Clicking the Reset button will cause the following screen to be displayed:
You can also press the RESET button on the side panel to reset the factory defaults of your
WR3000 Wireless Router. Refer to the Resetting the WR3000 Wireless Router section for more
information on the RESET button.
The router will now reboot.
As there will be no indication of when the process is complete,
please wait for one minute before attempting to access the
router again.
CONFIGURATION
Router back to factory defaults
CONFIGURATION
Click Reset to clear all user-entered configuration information
and return to factory defaults. After resetting, the
-Password will be 1234
-LAN IP address will be 192.168.150.1
-DHCP will be reset to server
Reset
Default
Restore
Backup