Filter
Top Products
WR3000 4-Port Wireless DSL/Cable Router
®
159
Chapter 20:
Internet Access
This chapter describes how to confi gure the WR3000 Wireless Router for Internet Access.
20.1 Internet Access Confi guration
Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually
a simplifi ed setup for one of the remote nodes that you can access in menu 11. Before you
confi gure your WR3000 Wireless Router for Internet access, you need to collect your Internet
account information from your ISP and telephone company.
Use the following table to record your Internet Account Information.
Use the following table to record your Internet Account Information.
Note that if you are using PPP or PPPoE encapsulation, then the only ISP information you
need is a login name and password.
FIELD
DESCRIPTION
DESCRIPTION
YOUR INFORMATION
YOUR INFORMATION
System Name
System Name
Enter the name of the WR3000 Wireless Router
Enter the name of the WR3000 Wireless Router
(optional).
Service Name
Service Name
(PPPoE)
Enter the PPPoE service name if the ISP
Enter the PPPoE service name if the ISP
supplies one. Enter “any if the ISP does not
assign you one.
Encapsulation
Select
Select
Ethernet, PPPoE
or
PPTP
My Login
Enter the login name assigned by your ISP (for
Enter the login name assigned by your ISP (for
PPP/PPPoE only).
My Password
Enter the password associated with your ISP
Enter the password associated with your ISP
assigned
My Login
(for PPP/PPPoE only).
Idle Timeout
(PPPoE or
PPP)
PPP)
Enter the time lapse, in seconds, before you
Enter the time lapse, in seconds, before you
automatically disconnect from the PPPoE or PPP
server.
IP Address
Enter if your IP address is not dynamically
Enter if your IP address is not dynamically
assigned.
Network
Address
Translation
Select
Select
Full Feature, SUA Only
Full Feature, SUA Only
or
None.
DNS Server
DNS Server
Address
Assignment
Primary DNS server Secondary DNS server
Enter when using RFC 1483 Encapsulation or a
static IP address.