Filter
Top Products
Station Info 104
Model 3101 Series Getting Started Guide 6 • Wireless Configuration
beacon) before sending the beacon again. The beacon interval may be adjusted in milliseconds (ms). The
default value (100) is recommended.
• XPress Technology: Select Enable or Disable. This feature is special acceleration technology for
IEEE802.11g. The default is Disabled.
• Transmit Power: Adjust the transmission range. This tool can be helpful for security purposes if you want
to limit the transmission range.
• WMM (Wi-Fi Multimedia): Select whether WMM is enabled or disabled. Before you disable WMM,
understand that all QoS queues/traffic classes that relate to wireless will not take effect.
• WMM No Acknowledgement: Select to enable or disable ACK in a WMM packet. By default, the 'Ack
Policy' for each access category is set to Disabled, meaning that an acknowledgement packet is returned for
every packet received. This provides a more reliable transmission but increases traffic load, which decreases
performance. Disabling the acknowledgement feature can be useful for voice applications where the trans-
mission speed is important and packet loss is tolerable.
• WMM APSD: (Automatic Power Save Delivery) Select Enabled for the unit to use very low power con-
sumption. WMM Power Save is an improvement to the 802.11e amendment adding advanced power man-
agement functionality to WMM.
Station Info
Click Station Info in the Wireless menu to view authenticated wireless stations and their status about associa-
tion and authentication. The Wireless -- Authenticated Stations page displays (Figure 127).
Figure 127. WMI: Authenticated Stations
Click Refresh to update the table of associated wireless stations.