Filter
Top Products
Wireless Security Setup 98
Model 3101 Series Getting Started Guide 6 • Wireless Configuration
WPA-PSK, WPA2-PSK, or Mixed WPA2/WPA-PSK
When you select WPA-PSK, WPA2-PSK, or Mixed WPA2/WPA-PSK as the Network Authentication mode
(Figure 122), provide information for the following parameters:
Figure 122. WMI: Wireless Security – WPA-PSK Authentication Mode
• WPA/WAPI passphrase: Enter the password for WPA station.
• WPA Group Rekey Interval: Enter a value for the time that the WPA key must change. If the value is set to
0, the change is done automatically between the server and the client.
• WPA/WAPI Encryption: Select one: TKIP, AES or TKIP + AES. (Default options are: TKIP for WPA-
PSK, AES for WPA2-PSK, and TKIP + AES for Mixed WPA2/WPA-PSK). TKIP + AES encryption mode
means the access point will automatically adjust to use TKIP or AES according to the wireless clients.
Click Apply/Save to activate your changes.