Filter
Top Products
WAN Service Setup 48
Model 3101 Series Getting Started Guide 5 • Advanced Configuration
7. The final connection configuration page (Figure 34) shows an summary of the IPoE settings. Click Save to
keep your settings. You will need to reboot the unit to activate this WAN service.
Figure 34. WMI: MER (IPoE) Connection Summary
PPP over ATM (PPPoA)
To create a new PPPoA connection:
1. Click Advanced Setup > Layer2 Interface > ATM Interface to configure, modify, and remove DSL ATM
interfaces. In the main DSL ATM interface list, you can click Add to configure a new ATM PVC identi-
fier for PPPoA mode.
Figure 35. WMI: ATM PVC Configuration
2. On the ATM PVC Configuration page (Figure 35), select the DSL link type for PPoA and select VC/
MUX as the encapsulation mode (according to the uplink equipment). Click the Apply/Save button for
the settings to take effect. The DSL ATM Interface list displays.