Filter
Top Products
Wireless Security Setup 95
Model 3101 Series Getting Started Guide 6 • Wireless Configuration
Provide information for the following parameters:
• Select SSID: Select the wireless LAN SSID to configure security features.
• Network Authentication: Select the authentication mode for the selected SSID. Authentication configura-
tion fields display automatically when you select a mode from this menu. Refer to the following sections for
more information on configuring selected network authentication modes:
- “Open or Shared” on page 95
- “802.1X” on page 96
- “WPA” on page 97
- “WPA-PSK, WPA2-PSK, or Mixed WPA2/WPA-PSK” on page 98
- “WPA2 or Mixed WPA2/WPA” on page 99
Open or Shared
When you select Open or Shared as the Network Authentication mode (Figure 119), provide information for
the following parameters:
Figure 119. WMI: Wireless Security – Shared Authentication Mode
• WEP Encryption: Set to Enabled.
• Encryption Strength: Select the data security level: 64-bit or 128-bit.
• Current Network Key: Select the Network Key (the fields listed below this option) you want to use.
• Network Key (1-4): For 64-bit encryption, enter five ASCII characters or ten hexadecimal digits for the
Network Key field(s). For 128-bit encryption, enter thirteen ASCII characters or twenty-six hexadecimal
digits. The system allows you to enter up to four WEP keys.
Click Apply/Save to activate your changes.