Patton electronic 3101 Network Router User Manual


 
Ethernet Interface 118
Model 3101 Series Getting Started Guide B • Specifications
Ethernet Interface
Model 3101/1I: One 10/100 Base-TX Ethernet port, IEEE 802.3/3u
Model 3101/4I: 4-port 10/100 Base-TX Ethernet port, IEEE 802.3/3u
Model 3101/4IWU: 4-port 10/100 Base-TX Ethernet port, IEEE 802.3/3u; One USB 2.0 device port, type B
connector
WiFi Interface
IEEE 802.11b/g
WEP: 64 or 128 bits key length
WPA/WPA2 (Wi-Fi Protected Access) in PSK mode or using EAP with RADIUS
Access control list based on MAC address
ADSL Interface
One pair (2-wire) loop, 100 Ohm line impedance with RJ-11 connector
ITU-T G.992.1, G.992.2, G.992.3, G.992.5 and ANSI T1.413 Issue 2
OAM
Local: Telnet or WWW management via Ethernet
Remote: Telnet or WWW management
ATM
ATM cells over ADSL, AAL5
8 PVCs in bridge mode and 5 PVCs in router mode
UBR, CBR, rt-VBR, nrt-VBR and GFR traffic classes
ADSL-aware CAC (Connection Admission Control)
F5 AIS, RDI, and loopback cells
Payload encapsulation: RFC2684/RFC1483—Multiprotocol Encapsulation over ATM Adaptation Layer 5,
FC2225/RFC1577—Classical IP and ARP over ATM (IPoA), RFC2364—PPP over AAL5 (PPPoA)
Bridging
RFC2684/RFC1483 bridged PDU encapsulation
IEEE 802.1D transparent bridging and spanning tree
ZIPB (Zero Installation PPP Bridge)
Routing
RFC2684/RFC1483 routed PDU encapsulation