WAN Service Setup 41
Model 3101 Series Getting Started Guide 5 • Advanced Configuration
• “PPP over Ethernet (PPPoE)” on page 41
• “MAC Encapsulation Routing (MER) (IPoE)” on page 45
• “PPP over Ethernet (PPPoE)” on page 41
• “IP over ATM (IPoA)” on page 52
• “Bridging” on page 55
PPP over Ethernet (PPPoE)
To create a new PPPoE connection:
1. Click Add from the main WAN service page to configure a new connection. (Before you can add a new
PPPoE service, make sure that you have created a proper ATM PVC configuration. See figure 19 on
page 39). The following page displays. Click Next to continue.
Figure 22. WMI: Select Layer2 Interface
2. On the Connection Type page (Figure 23), select the radio button for PPP over Ethernet (PPPoE). Click
Next to continue.
Figure 23. WMI: PPPoE Connection Type