Filter
Top Products
WAN Service Setup 55
Model 3101 Series Getting Started Guide 5 • Advanced Configuration
9. The final connection configuration page (Figure 49) shows an summary of the IPoA connection. Click
Save to keep your settings. You will need to reboot the unit to activate this WAN service.
Figure 49. WMI: IPoA Connection Summary
Bridging
To create a new bridge connection:
1. Click Add from the main WAN service page to configure a new connection. (Before you can add a new
PPPoE service, make sure that you have created a proper ATM PVC configuration. See figure 19 on
page 39). The following page displays. Click Next to continue.
Figure 50. WMI: Select Layer2 Interface