Filter
Top Products
20 Pelco Manual C1515M-A (11/01)
KBD100, KBD200, AND KBD300 SERIES KEYBOARDS
You can connect up to eight KBD100/200/300 Series keyboards to any of the following ports:
• COM 5 (1 direct-powered keyboard or up to 8 remotely connected keyboards)
• COM 6 (1 direct-powered keyboard or up to 8 remotely connected keyboards)
• COM 7 (up to 8 remotely connected keyboards)
• COM 8 (up to 8 remotely connected keyboards)
The total number of KBD100/200/300 Series keyboards connected to the CM6800 cannot
exceed 16.
KBD100, KBD200, and KBD300: Direct-Powered Keyboards
Use COM 5 and 6 (Serial Ports 5 and 6) for direct-powered local keyboards. Each port can
power one KBD100/200/300 Series keyboard.
If you are connecting more than one keyboard to COM 5 or 6, a KBDKIT(-X) is required for
each keyboard. Refer to the
KBD100, KBD200, and KBD300: Remote Keyboards
section.
1. Using the 25-foot (7.62 m) straight data cable supplied with the keyboard, plug one
end into the RJ-45 connector on the rear of the keyboard.
NOTE:
If distance between
CM6800 and keyboard
exceeds 25 feet, use
KBDKIT(-X).
00603
Figure 12. Data Cable Plugged into Local Keyboard
2. Plug the other end of the data cable into either COM 5 or 6 on the CM6800.
00604
Figure 13. Data Cables Plugged into COM 5 and 6
Installation:
Keyboards