Filter
Top Products
Pelco Manual C1515M-A (11/01) 73
Table H. Macro Commands (Continued)
Command Description Specify Field(s)
PIPO Turn off multiplexer picture-in-picture view. Multiplexer input (1-48) Camera
Monitor (1-8) Monitor
QUAD Display multiplexer four-camera mode. Camera group (1-4)* Command #
Multiplexer input (1-48) Camera
Monitor (1-8) Monitor
NANO Display multiplexer nine-camera mode. Camera group (1-3)* Command #
Multiplexer input (1-48) Camera
Monitor (1-8) Monitor
HEX Display multiplexer sixteen-camera mode. Multiplexer input (1-48) Camera
Monitor (1-8) Monitor
ZOOM Zoom multiplexer camera view. 1 = zoom once Command #
2 = zoom twice
Multiplexer input (1-48) Camera
Monitor (1-8) Monitor
AAI Arm internal alarm. Internal alarm (1-8) Command #
DAI Disarm internal alarm. Internal alarm (1-8) Command #
AAE Arm external alarm. External alarm (1-128) Command #
DAE Disarm external alarm. External alarm (1-128) Command #
AAV Arm video loss detection for a camera. Physical camera number (1-32) Command #
OR
Logical camera number Camera
DAV Disarm video loss detection for a camera. Physical camera number (1-32) Command #
OR
Logical camera number Camera
PATT Start a pattern. Pattern (#)** Command #
Camera (1-48) Camera
Monitor (1-8) Monitor
PRES Start a preset. Preset (#)** Command #
Camera (1-48) Camera
Monitor (1-8) Monitor
RSCN Start a random scan. Camera (1-48) Camera
Monitor (1-8) Monitor
FSCN Start a frame scan. Camera (1-48) Camera
Monitor (1-8) Monitor
SSCN Stop a scan. Camera (1-48) Camera
Monitor (1-8) Monitor
* Refer to the MX4000 Genex Series Simplex and Duplex Multiplexers Installation/Operation Manual for information on multiple
camera displays.
** The number of patterns and presets available is determined by the camera positioning system. Refer to the appropriate camera
positioning system manual.
Appendix