Filter
Top Products
70 Pelco Manual C1515M-A (11/01)
OPERATE SCANNING FUNCTIONS
Operation of the scanning functions depends on the kind of receiver or pan/tilt mechanism
you have. Refer to the appropriate keyboard manual for detailed instructions on operating
scanning functions.
DETECT VIDEO LOSS
The CM6800 detects video loss from any system camera. If video is lost from a camera,
the CM6800 blue screen appears on any monitor viewing that camera. When video is
restored to that camera, the camera view appears on the monitor(s) again. If the system is
programmed for a video loss alarm, the alarm icon appears.
DEFINE ZONES
A zone is a user-defined, physical location to which (1) a label is attached and (2) a camera
is associated. When the associated camera is panned through or remains within this
defined zone the zone label appears on the monitor.
Refer to the appropriate keyboard manual for detailed instructions on defining zones.
KBD200/300 KEYBOARDS
1. Enter the number of the multiplexer
input.
2. Press the CAM key.
3. Press the SHIFT key. When the
SHIFT LED is lit, the keyboard can be
used to operate the following Genex
multiplexer function keys:
F1: Digital zoom
F2: PIP display
F3: Quad display
F4: 9-screen display
F5: 16-screen display
To select a camera through the
multiplexer:
a. Enter the desired camera number
(1-16, based on the camera
assignments set through the
multiplexer).
b. Press the CAM key.
4. Press the SHIFT key to return to
normal keyboard operation.
When the SHIFT LED is off, you can
control the currently selected PTZ
camera through the multiplexer.
To return to camera selection
controlled by the CM6800:
a. Select the desired camera number.
b. Press the CAM key.
c. Move the joystick as necessary.
CONTROL GENEX MULTIPLEXER AND GENEX MULTIPLEXER
DISPLAYS
Multiplexer control is not available with the KBD100.
KBD960/KBR960 KEYBOARDS
1. Press to access the MUX
Control Menu.
2. Press or to scroll through
the available MUX camera numbers.
3. Press if necessary. must
be highlighted before the system
can control Genex Multiplexer
functions.
4. Move the joystick or press the
appropriate MUX control icons as
necessary for multiplexer opera-
tion. Refer to the KBD960
Keyboard Installation/Operation
Manual for detailed operation
instructions.
MUX MUX
MUX
Operation