Filter
Top Products
Pelco Manual C1515M-A (11/01) 65
OPERATE SEQUENCES
You can run a scratchpad sequence from an individual monitor or a system sequence on
any monitor accessible from the keyboard. When running a sequence, any cameras not
accessible to the keyboard will be bypassed.
KBD100/200/300 KEYBOARDS
Run a Sequence
1. Enter a sequence number (1-16). Skip
this step to run a scratchpad sequence.
2. Press and hold the NEXT or PREV key
to move forward or backward through
the sequence.
To move through the sequence one
camera at a time:
Press the NEXT key to move forward.
Press the PREV key to move backward.
Pause a Sequence
1. Press the HOLD key; monitor displays H.
2. Press the HOLD key to resume.
Stop a Sequence
1. Enter a camera number.
2. Press the CAM key.
KBD960/KBR960 KEYBOARDS
Run a Sequence
1. Select .
2. Enter a sequence number (1-16
for a system sequence; 0 for the
scratchpad sequence).
3. Select to start the sequence.
OR
1. Select .
2. Select to enter the Sequence
Menu.
3. Enter a sequence number (1-16).
OR
Select or to scroll
through available sequences.
4. Select or
to start the
sequence.
NOTE: You can define a function key
to run a sequence. Refer to the
KBD960 Keyboard Installation/
Operation Manual for instructions.
Pause a Sequence
1. Select .
2. Select or to resume.
Stop a Sequence
1. Select .
OR
1. Enter a camera number.
2. Press the CAM key.
SEQ
SEQ
KBD960/KBR960 KEYBOARDS
Lens Control: Focus, Iris
Use the NEAR/FAR key to focus
near or far.
Use the OPEN/CLS key to open
or close the iris.
Pan/Tilt/Zoom
Move the joystick until the camera reaches the
desired position. To increase the speed of
movement, move the joystick farther from
center or press the T key to pan at turbo speed.
Twist the joystick clockwise to zoom in,
counterclockwise to zoom out. Or use the IN/
OUT key to zoom in or out.
Operation