Filter
Top Products
Pelco Manual C1515M-A (11/01) 69
Operate an External Auxiliary
The CM6800 can control up to two REL2064 Relay Interface Units connected to the
system. Each unit provides 64 relays. Refer to the REL2064 Relay Interface Unit
Installation/Operation Manual for detailed information. External relays cannot be operated
with the KBD100.
KBD960/KBR960 KEYBOARDS
1. Enter the GPI number for the
appropriate relay output.
2. Press .
3. Press the desired AUX number
icon to activate the relay and
associated peripheral device.
(Press to access AUX 5-8.)
4. If is highlighted, the operation
is momentary. If is not
highlighted, the operation is
latching. Refer to the KBD960
Keyboard Installation/Operation
Manual for instructions.
KBD200/300 KEYBOARD
The KBD200/300 keyboards (firmware
version 4.2 and later) can operate external
relays.
Refer to the KBD200 Keyboard Installation/
Operation Manual or the KBD300
Keyboard Installation/Operation Manual for
instructions.
NOTE: External relays cannot be operated
with KBD200/300 keyboard firmware
versions prior to 4.2.
Operate an Auxiliary in a Receiver
Auxiliary control is not available with the KBD100.
KBD960/KBR960 KEYBOARDS
From the Camera Menu, press ,
and then release to control an AUX 1
momentary function on the selected
camera.
Press to control an AUX 2
momentary function. Press to
access through .
KBD200/300 KEYBOARDS
Press F4 to activate.
Press F5 to deactivate.
OR
To control a momentary function:
1. Enter the auxiliary number.
2. Press and hold F4, and then release.
GPI
MTRY
MTRY
1
2
3
8
Operation