Filter
Top Products
26 Pelco Manual C1515M-A (11/01)
Connecting a Single REL2064 Relay Interface Unit
To connect a single REL2064 Relay Interface Unit:
1. Connect the REL2064 OUT port to COM 3 on the CM6800 using the 6-foot (1.8 m)
straight data cable supplied with the CM6800.
2. Set SW2, DIP switches 1-8 to the appropriate positions for the local address (default
address setting is 1). Refer to the REL2064 Relay Interface Unit Installation/Operation
Manual for instructions.
00609
Figure 18. Connecting a Single REL2064 Relay Interface Unit
Installation:
M Devices