Filter
Top Products
Pelco Manual C1515M-A (11/01) 51
EVENT TIMERS
You can automate system operation to activate sequences or macros on specific monitors.
Events can be scheduled on a daily or weekly basis, or on a specific date such as a
holiday. If you set more than one timer to start at the same time, the timers will run in the
following order of precedence: weekly, special, daily.
On each event timer screen:
•Two methods are provided for selecting the event time: scrolling through time values
or entering a valid hour and minute.
• Each timer can activate either a macro or a sequence. Select a value for either the
MACRO field or the SEQ field.
•A macro started by an event timer runs until the last step is completed (unless you
specify a loop in the macro).
•A sequence started by an event timer runs continuously until another sequence or
macro begins, or until a system operator selects a different camera.
Daily Timer
Use the Daily Timer screen to schedule up to 32 daily events.
Figure 39. Access the Daily Timer Screen
DAILY TIMER: Select the timer number (01-32).
ENABLE: Enable (ON) or disable (OFF) the timer.
TIME: Set the hour and minute at which the event is to begin (24-hour time).
MACRO: To activate a macro, select a valid macro number (01-32).
SEQ: To activate a sequence, select a valid sequence number (01-16) to run
on a specific monitor.
PELCO SWITCHER
MODEL CM6800
MAIN MENU
1 CAMERA
2 LOGICAL CAMERA
3 MONITOR
4 ACCESS
5 TIME & DATE
6 PORT
7 PRIORITY
8 SEQUENCE
9 MACRO
10 ALARM CONTACTS
11 EVENT TIMER
12 SET AUXILIARY
13 SET PASSWORD
14 ABOUT CM6800
ENGLISH
RETURN
00654
DAILY TIMER 01
ENABLE: OFF
TIME: 12:02
MACRO 00
MON SEQ
100
200
300
400
500
600
700
800
RETURN
00647
EVENT TIMER
1 DAILY TIMER
2WEEKLY TIMER
3 SPECIAL TIMER
RETURN
00648
Event Timer
Programming