Filter
Top Products
Initial Operation · Removing Packaging Material 13
EN
3 Remove the toner cartridge by gripping the handle in
the middle and pulling it forwards out of the device
4 Remove the tape and protective paper, but do not
remove the protective strip from the car-
tridge yet .
5 Shake the new toner cartridge back and forth several
times in order to distribute the toner evenly,
thereby improving the print quality.
6Only after completely pull off the protection strip
located on the left side of the cartridge.
7 Place the toner cartridge into your device. The car-
tridge should snap securely into position.
8 Close the device.
9 Close the upper device cover.
DANGER!
Escaping Toner Dust!
Never open a toner cartridge. If toner dust
is released into the air, you should avoid
allowing it to contact your skin and eyes.
Do not inhale the released toner dust.
Remove the toner dust from clothing or
objects with cold water; hot water would
only cause the toner to set. Never remove
loose toner dust with a vacuum cleaner.
DANGER!
Escaping Toner Dust!
Once you have removed the protection
strip, do not shake the toner cartridge any
more. Otherwise, it is possible that toner
dust will be released into the air.
CAUTION!
Toner Cartridge Not Inserted Cor-
rectly!
If the device cover would not close, the
toner cartridge is not inserted correctly.
Take the toner cartridge out and insert it
again correctly.