Filter
Top Products
Initial Operation · Connecting the Telephone Cable 15
EN
Connecting the Telephone
Cable
Connecting the Telephone Cable
Connect the telephone cable to the device by inserting
it in the socket designated with FAX/Ñ (RJ-11-Connec-
tor). Insert the telephone plug into your PTT line
socket.
Telefonkabel anschließen
Connection to an ISDN system!
PABX Systems 1
Connecting the Mains Cable
Mains Voltage at the Site of Installation
1 Insert the mains cable into the connection located
on the rear side of the device. Plug the power cable
into the electrical outlet.
2 Switch the device on using the on/off switch on the
rear.
Spaltenumbruch
Initial Installation
Initial Installation
After you connect your device to the mains voltage, the
device starts. During the booting process, the lights
flash. Wait until the initial installation process begins.
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Selecting the Country
Setting the Country Correctly
Setting the Country
1 Use [ to select the country in which you are oper-
ating the device.
2 Confirm with OK.
Set the Time Zone
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
Set the Time Zone
In countries with several time zones, you can select
from preset time zones or manually enter the deviance
of your time zone from UTC (see also chapter on setting
the time zone, page 57). In countries with one time
zone, the setting is adjusted automatically if you set the
country correctly.
1 Use [ to select the time zone in which you are
operating the device.
2 Confirm with OK.
Automatic Changeover Between Summer Time/Winter Time
CAUTION!
Connection to an ISDN system!
You can not connect your devices directly to
the digital output of the ISDN system. Details
for ISDN connections can be found in the
instructions provided with the terminal
adapter or the dial-up router.
Notice
Connection to Private Automatic
Branch Exchange
If you connect your device as extension to a
telephone system, you must set it for working
as an extension (also see Chapter Telephone
Lines and Additional Devices, page 64).
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device
(indicated on the type label) matches the mains
voltage available at the setup location.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
Notice
Automatic Changeover Between Sum-
mer Time/Winter Time
With setting the country and time zone, the auto-
matic changeover between summer and winter
time is switched on. The automatic changeover is
switched off if you enter the deviance from UTC
manually using the time zones editor