Filter
Top Products
Settings · Print Lists and Reports 63
EN
Lock USB Storage Medium
Lock USB Storage Medium
You use this function to block access to a connected
USB storage medium.
1 Press C, 925 and OK.
2 Enter the four-digit PIN code.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Lock Settings
Lock Settings
This function blocks the changing of settings on your
device. The settings can be locked with a customizable
administrator pin code
Entering the PIN Code
Default Access Code
1 Press C, 0001 and OK.
2 Enter a four-digit PIN code.
3 Confirm with OK.
4 Enter the code again for confirmation purposes.
5 Confirm with OK.
Activate and deactivate functions
1 Press C, 0002 and OK.
2 Enter the four-digit PIN code.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Print Lists and Reports
Printing the Functions List
Printing the Functions List
Press C, 81 and OK to print a list of all functions
of your device.
Printing the Telephone Book
Printing the Telephone Book
Press C, 83 and OK to print a list of all saved
entries and groups in the telephone book.
Printing Fax Journal
Fax Journal
The journal contains a list of the last 30 message trans-
missions. The fax journal is automatically printed after
30 transmissions. You can print out the fax journal at
any time.
Printing Fax Journal/Call Log
Press C, 82 and OK.
Printing the Job List
Printing the Job List
Press C, 84 and OK. The device will print out a list
of all pending jobs.
Prints the List of Settings
Prints the List of Settings
Press C, 80 and OK to print a list of all settings of
your device.
Notice
Default Access Code
The function is switched off with the factory-
installed access code (
0000). Change the
access code to switch on the function. If you
want to switch the function off enter the fac-
tory-installed code
0000 again.
Notice
Entering the PIN Code
If you have already saved a code, the device
will ask you to provide the old code first
before you can enter a new code.