Filter
Top Products
58 Philips · LaserMFD 6170dw
EN
Entering Your Telephone
Number and Name
Page Header
Your name and number are added together with date,
time and page number at the top edge of each fax trans-
mission (= header).
Folding Up Protective Cover
Fold the protective cover of the letter keypad up
Deckel der Buchstabentastatur öffnen
Cursor Navigation 4
Entering Name
1 Press C, 021 and OK.
2 Enter the name using the keys (A—Z).
3 Confirm with OK.
Entering Number
1 Press C, 022 and OK.
2 Enter your number.
3 Confirm with OK.
Setting the Ring Tones
Selecting the Ring Tone
Selecting the Ring Tone
You can use this function to select the standard ring
tone. You can assign a separate ring tone to entries in
the telephone book (see also chapter on saving an entry,
page 39).
1 Press C, 054 and OK.
2 Select the desired ring tone using [.
3 Confirm with OK.
Adjusting Volume Level
1 Press C, 055 and OK.
2 Select the desired volume level using [.
3 Confirm with OK.
Setting the Number of Rings
Setting the Number of Rings
You can use this function to set the number of rings for
the fax reception mode. After the selected number of
rings, the device switches to fax reception in the fax
mode. Select
0 to switch off the ring tone completely
(see also chapter on silent fax reception , page 61).
1 Press C, 042 and OK.
2 Select the desired number of rings using [.
3 Confirm with OK.
Deactivating the Button
Tones
Deactivating the Button Tones
Every key press is accompanied by a sound. You can
switch off the key tones on your device.
1 Press C, 007 and OK.
2 Use [ to select whether you would like to turn the
function on or off.
3 Confirm with OK.
Configure Paper Settings
Modifying the Basic Settings
Set Paper Weight
1 Press C, 201 and OK.
2 Using [ select the weight of the inserted paper.
3 Confirm with OK.
Set Paper Source
Introduction
You can insert normal printing paper or printed docu-
ments (forms) into the paper tray. You can insert spe-
cial paper formats, envelopes, slides, sheets of labels or
printed documents into the manual paper feed.
1 Press C, 202 and OK.
2 Using [ select the paper source.
3 Confirm with OK.
Spaltenumbruch
Notice
Enter Letters
Enter capital letters by pressing and holding +
key. You can enter space using ½ ;.
The special characters available are located
directly above the letter keypad and can be
entered by pressing the õ- key and the
respective letter key at the same time.
You can move the cursor using [. Use C to
delete individual characters.
Notice
Modifying the Basic Settings
The changed settings are stored as new
default settings. If you select a special function
for a one-time process, take care to restore
the default settings or factory settings after
that.