Filter
Top Products
66 Philips · LaserMFD 6170dw
EN
Display Date and Time
Deregistering Cordless
Telephone
Deregistering Cordless Telephone
You can deregister a cordless telephone either from the
device or from the cordless telephone. Follow the
instructions in the operating instructions of the cordless
telephone.
1 Press C, 522 and OK.
2 Using [ to select which cordless telephone you are
would like to de-register.
3 Confirm with OK. The device disconnects from the
cordless telephone.
Looking for Cordless Telephone
Looking for Cordless Telephone
This function helps you in locating cordless telephones,
which you have misplaced. For this purpose the cord-
less telephones must be registered with the device and
must be within its range.
1 Press C, 523 and OK.
2 All cordless telephones registered with the device
ring for approx. one minute. You can end the search
function by pressing j on the device or pressing the
button to hang up on the cordless telephone.
Connecting Additional
Devices
Additional Devices
You can operate additional devices on a telephone line,
such as cordless telephones, answering machines,
modems or charge counters.
Connection to the Device
Connection to the Device
You can connect additional devices directly to your
device. Insert the telephone cable of the additional
device into the AUX./Ò socket (RJ-11-connection) on
the device.
Externe Geräte anschließen
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the device must
be first in the series if multiple devices are connected to
the same telephone socket. Follow the correct order.
Connection to the First Telephone Socket
Using Additional Telephones
(Easylink)
Easylink
With the Easylink function you can control your device
with additional telephones. To use this function, addi-
tional telephones must be set to the tone dialling mode
(DTMF/MFV tones) (for this purpose see the operating
manual of your additional telephone).
Starting Fax Reception
If you pick up at an additional device and hear that you
are receiving a fax (whistling tone or silence), you can
start the fax reception by pressing *5 on the addi-
tional telephone or pressing o on the device.
Hang up Additional Telephone
Hang up the additional telephone when the ring tone
changes. The device has accepted the reception of the
fax message.
Taking Over the Line
If you pick up on an additional telephone and the device
continues to ring or attempts to receive a fax, you can
disconnect the device from the line. Press on the addi-
tional telephone.
Using an External Answering
Machine
Your external answering machine must have parallel
recognition for accepting incoming calls. Consult your
retailer.
For the best operation, the answering machine must be
connected to the AUX./Ò socket of the device. Select
EXT/ answering machine mode as the fax reception
mode (see also chapter on Setting the Fax Reception
Mode, Page 60).
Length of Outgoing Message
Notice
Display Date and Time
Date and time of the cordless telephone is
continually synchronised with the device.
Notice
Connection to the First Telephone
Socket
If you have multiple telephone sockets for the
same telephone line, the device must be con-
nected to the first telephone socket.
Notice
Length of Outgoing Message
The outgoing message must be shorter than
ten seconds. Avoid music in your announce-
ment. If the external answering machine has a
“conserving function” (i.e. a function that
changes the number of rings as soon as new
messages have been recorded), switch it off.