Filter
Top Products
54 Philips · LaserMFD 6170dw
EN
5 Confirm with OK.
Set IP Address Assignment
Introduction
The IP address assignment allows you to select whether
your device's IP address is assigned dynamically by a
DHCP or BOOTP router/server or statically assigned
by the user. You can enter IP addresses, subnet masks,
gateways or two alternative domain name servers
(DNS) for the configuration of the static network con-
nection.
1 Press C, 083 and OK.
2 Select automatic or manual configuration using [.
3 Confirm with OK.
This Process May Take a Few Moments.
Set Static IP Address Assignment
Available Function (WLAN)
Enter IP Address
Introduction
The IP address is the address of the device in the net-
work. It must not match the IP address of the computer
or other network components, however it must be
located in the IP field.
1 Press C, 0841 and OK.
2 Enter the IP address (for example 192.168.001.×××).
3 Confirm with OK.
Entering the Subnet Mask
Introduction
In a network with a gateway or router, the subnet mask
indicates whether the respective data packets are
addressed to an internal recipient in the network or
whether they should be sent to a recipient outside of
the network.
1 Press C, 0842 and OK.
2 Enter the subnet mask (for example
255.255.255.000).
3 Confirm with OK.
Enter IP Address of the Access Point
(= Gateway)
1 Press C, 0843 and OK.
2 Enter the IP address of the access point (Access
Point, Router).
3 Confirm with OK.
Enter Domain Name Server (DNS)
Introduction
The DNS translates IP addresses in the names of inter-
net pages and vice-a-versa. You can enter a primary and
secondary DNS.
Enter Primary DNS
1 Press C, 0844 and OK.
2 Enter the address of the primary DNS.
3 Confirm with OK.
Enter Secondary DNS
1 Press C, 0845 and OK.
2 Enter the address of the secondary DNS.
3 Confirm with OK.
Verify DHCP Settings
Available Function (WLAN)
Introduction
With these functions, you can verify the assigned net-
work settings from your network's DCHP router. You
cannot modify the settings.
Displaying the IP Address
1 Press C, 0851 and OK.
2 The current IP address is displayed; it is the address
that your device is registered with on the network.
Display Subnet Mask
1 Press C, 0852 and OK.
2 The subnet mask being used is displayed.
Notice
WPA Key
Enter an 8 to 63 character long password.
The password can contain alphanumerical
characters—numbers and letters—and
any other symbol available on the keypad.
The only invalid character is "€” (the euro
currency symbol).
Notice
This Process May Take a Few Moments.
The automatic configuration of IP address and
subnet mask on the connected network PCs
may take a moment.
Notice
Available Function
This function is only available if you have
selected static IP address assignment with the
function 083.
Notice
IP-Address
The first three blocks of numbers refer to
the IP field; this information must match
the IP address on your computer. The last
three digits determine are the individual IP
address of the device. You can enter any
number between 000 and 255. However,
this number must be unique within the net-
work; it may not be used on any other PC
or network component.
Notice
Available Function
This function is only available if you have
selected automatic IP address assignment with
the function 083.